Here you can add links (or references) to publications with OpenFOAM for turbomachinery applications.
1 Papers
- H.Nilsson and M.Page. OpenFOAM simulation of the flow in the H�?¶lleforsen draft tube model, presented at the Turbine-99 workshop in Porjus, December 2005. The paper does not show all the comparisons with experiments and other numerical contributions. For such comparisons the workshop proceedings should be investigated.
- H.Nilsson. CFD in water turbines -- an HPC challenge, presented at the PARA'06 workshop in Ume�?¥, 2006. A comparison of OpenFOAM run on Gigabit and Infiniband interconnects is included.
- H.Nilsson. Evaluation of OpenFOAM for CFD of turbulent flow in water turbines, presented at the IAHR symposium in Yokohama, October 2006.
- H.Nilsson. Experiences with OpenFOAM for water turbine applications, presented at the OpenFOAM conference in Old Windsor, London, November 2007.
- H. Nilsson, M. Page, M. Beaudoin, B. Gschaider and H. Jasak. The openFOAM Turbomachinery Working Group, and Conclusions from the Turbomachinery Session of the Third OpenFOAM Workshop. Presented at 24th IAHR Symposium on Hydraulic Machinery and Systems, October 27-31, 2008, Foz Do Iguassu, Brazil.
- O. Bounous. Studies of the ERCOFTAC Conical Diffuser with OpenFOAM. Research Report 2008:05, Applied Mechanics, Chalmers University of Technology, Sweden, 2008. Presented at the Third OpenFOAM Workshop in Milano, July 9-11, 2008.
- Petit, P., Page, M., Beaudoin, M., Nilsson, H., "The ERCOFTAC centrifugal pump OpenFOAM case-study", 3rd IAHR International Meeting of the Workgroup on Cavitation and Dynamic Problems in Hydraulic Machinery and Systems, October 14-16, 2009, Brno, Czech Republic (paper)
- Page, M., Beaudoin and A.-M. Giroux, H., "Steady-State Capabiblities for Hydroturbines with OpenFOAM", International Journal of Fluid Machinery and Systems, Vol. 4, No. 1, January-March 2011, (journal paper [Initially published at Conference Series: Earth and Environment Science, Volume 12 (25th IAHR Symposium on Hydraulic Machinery and Systems 20–24 September 2010 'Politehnica' University of Timişoara, Timişoara, Romania) (conference paper) ]
2 Slides
- M.Page and H.Nilsson. OpenFOAM Turbomachinery Working Group, presented at the Second OpenFOAM Workshop in Zagreb, June 2007.
- M.Page and M.Beaudoin. Adapting OpenFOAM for Turbomachinery Applications, presented at the Second OpenFOAM Workshop in Zagreb, June 2007.
- H.Nilsson. OpenFOAM activities at Chalmers and within the Swedish Water Power Center, presented at the Second OpenFOAM Workshop in Zagreb, June 2007.
- M.Karlsson and H.Nilsson. Numerical Calculations of Rotordynamical Coefficients and Forces on a Hydropower Turbine Runner Using OpenFOAM, presented at the Second OpenFOAM Workshop in Zagreb, June 2007.
- H. Nilsson, M. Page. The openFOAM Turbomachinery Working Group, and Conclusions from the Turbomachinery Session of the Third OpenFOAM Workshop, presented at 24th IAHR Symposium on Hydraulic Machinery and Systems, October 27-31, 2008, Foz Do Iguassu, Brazil.
3 Posters
- Petit, P., Page, M., Beaudoin, M., Nilsson, H., "The ERCOFTAC centrifugal pump OpenFOAM case-study", 3rd IAHR International Meeting of the Workgroup on Cavitation and Dynamic Problems in Hydraulic Machinery and Systems, October 14-16, 2009, Brno, Czech Republic (poster)
- Page, M., Beaudoin, M., Nilsson, H., "OpenFOAM Turbomachinery Working Group", 3rd IAHR International Meeting of the Workgroup on Cavitation and Dynamic Problems in Hydraulic Machinery and Systems, October 14-16, 2009, Brno, Czech Republic (poster)
Back to Sig Turbomachinery
