Main ContribExamples/HighRiseBuildingInCityBlocks
From OpenFOAMWiki
Contents
1 Short description
This turorial case analyzes wind environment around high-rise building in city blocks. It can automatically vary in wind direction of inlet flow among 0, 22.5, 45 degree. It also compares CFD result with wind tunnel experiment results.
2 Usage
To run this tutorial case automatically, just type:
./Allrun
It will automatically calculate three different wind direction cases, so it would take a long time to finish. If you want to calculate each cases manually, type ./Allrun in directory of each cases.
After the execution it would makes figures listed below.
- res.eps - Initial residual
- velocityThermistor.eps - Comparison between present CFD result and wind tunnel experiment results measured by thermistor anemometer
- corvelocityThermistor.eps - Correlation between present CFD result and wind tunnel experiment results measured by thermistor anemometer
- velocitySplit.eps - Comparison between present CFD result and wind tunnel experiment results measured by anemometer with split-fiber probe (only in deg0 case)
- corvelocitySplit.eps - Correlation between present CFD result and wind tunnel experiment results measured by (only in deg0 case)
To clean all files this tutorial makes, just type:
./Allclean
3 Download
Preprocessing utility setDiscreteFields and gnuplot are required to run this tutorial
4 History
Masa 10:52, 20 August 2008 (CEST): Initial version.