Main ContribExamples/HighRiseBuildingInCityBlocks
From OpenFOAMWiki
Contents
1 Short description
This turorial case analyzes wind environment around high-rise building in city blocks. It can automatically vary in wind direction of inlet flow among 0, 22.5, 45 degree. It also compares CFD result with wind tunnel experiment results.
2 Usage
To run this tutorial case automatically, just type:
./Allrun
It will automatically calculate three different wind direction cases, so it would take a long time to finish. If you want to calculate each cases manually, type ./Allrun in directory of each cases.
After the execution it would makes figures listed below.
- res.eps - Initial residual
- velocityThermistor.eps - Comparison between present CFD result and wind tunnel experiment results measured by thermistor anemometer
- corvelocityThermistor.eps - Correlation between present CFD result and wind tunnel experiment results measured by thermistor anemometer
- velocitySplit.eps - Comparison between present CFD result and wind tunnel experiment results measured by anemometer with split-fiber probe (only in deg0 case)
- corvelocitySplit.eps - Correlation between present CFD result and wind tunnel experiment results measured by anemometer with split-fiber probe (only in deg0 case)
To clean all files this tutorial makes, just type:
./Allclean
3 Download
- CaseD-2010102901.tar.gz Latest version
- HighRiseBuildingInCityBlocks-2010101101.tar.gz
- HighRiseBuildingInCityBlocks-20090308.tar.gz
- HighRiseBuildingInCityBlocks-20081222.tar.gz
- HighRiseBuildingInCityBlocks-20070820.tar.gz
Preprocessing utility setDiscreteFields and gnuplot are required to run this tutorial
4 History
- Masa 13:51, 29 October 2010 (CEST): Add README
- Masa 07:33, 11 October 2010 (CEST): Modified for OF Ver.1.7.
- Masa 12:11, 22 December 2008 (CET): Calculate root mean square error of velocity and print it at every velocity's correlation figure. Add corvelocitySplitCodeM.eps and corvelocitySplitCodeT.eps.
- Masa 10:52, 20 August 2008 (CEST): Initial version.